Shipping & Returns

All Returns must be send to our store location with your order number include to:
MID Hardware
Attn: Return Dept.
2800 W. Dauphin street Suite 420
Philadelphia, PA 19132

:

Wrong Item Received/Defective/Damage Merchandise Policy

Shipping Damaged Products should be refused. If Shipping Damaged Products are accepted inadvertently, You must mail MID Hardware Customer Support at support@midhardware.com WITHIN THE FIRST 48 hours of receipt to report damage and be eligible for damage claim (a picture is worth thousands words so attach a good quality picture if possible). This is necessary for MID Hardware to file a shipping damage claim on behalf of customers. MID Hardware is not liable for any monies lost when the carrier refuses shipping damage claims.

 

Non-Defective Products ( "Buyers Remorse" )

To request return authorization procedure, please email Customer Support at support@midhardware.com.

 

RMA Fee Schedule for Returned Item Condition

Products returned New, Unopened in perfect condition with all packaging and item materials and manuals that can be resold as new are subject to a 15% or $ 5 restock fee (whichever is greater). Also, Shipping cost and Low Order Fee are not refundable.
Products returned Opened with missing items, packaging or accessories or customer caused item, packaging or accessory damage that cannot be resold as for any reason will be discarded with no refund.
Failure to return a product within 30 calendar days from purchase date will be deemed to be a permanent acceptance of the product. Return is not allowed for any reason after this point. The return must go to our return warehouse with a valid RMA on the label via FedEx or UPS with tracking showing pickup on or before 30 calendar days from purchase date.
Customers will incur the expense for returning the item. We do not reimburse shipping charges. We do not issue Pre-Paid Shipping Labels to return merchandise that is being sent back to us for a refund.
Usually there is no Refunds or exchanges for items in the categories below. DEFECTIVE EQUIPMENT IS REPAIRED - NOT RETURNED!  Due to the nature of these products, on-site repair by the customer and/or taking the item to local service center might be required.  In most cases, defective/damaged/missing parts will be mailed to the customer to be repaired by the customer on-site by the manufacturer or by us. Please contact us for details.

•  OUTDOOR EQUIPMENT AND POWER TOOLS
•  OUTDOOR LIVING AND FURNITURE
•  HEATERS AND COOLING SUPPLIES
•  SPECIAL ORDERS
•  BAR-A-QUES GRILLS
•  SNOW THROWERS
•  ELECTRICAL ITEMS & SUPPLIES
•  GAS-POWERED ITEMS
•  OVERSIZE ITEMS
•  ITEMS INCLUDING AND OVER 50 LBS.
•  ITEMS THAT REQUIRE SPECIAL DELIVERY

 

IMPORTANT MID HARDWARE NOTES

To request return authorization procedure, please email Customer Support at support@midhardware.com. Returned product must have a valid MID HARDWARE RMA number written on the shipping label. Return shipments without valid MID HARDWARE RMA numbers will be rejected. Customer is responsible for return shipping charges to our store location only NOT to distribution center where it was shipped from. Customer is responsible for all risk of loss and damage to products being shipped for return. Fully insure return shipment in case of loss or damage.

Continue
Manufacturers
We Accept
1 x Halex 68720 Reducing Washer, 3-1/2 in OD, Steel - 10 Pack
1 x Boston Harbor CF-78133 Ceiling Fan, 4-Blade, 42 in Sweep, White Housing
1 x HY-KO 11010ARE1 Key Blank, Brass, Nickel-Plated, For: Truck Cap ARE1 - 10 Pack
1 x Oatey 30712 Acid Brush, 3 in L x 1/2 in W Brush, Tin Handle, 6 in OAL - 144 Pack
1 x Forney 57602 Electrical Plug, 250 V, 30/50 A
1 x Halex 96821 Reducing Washer, 1.43 in OD, Steel
1 x Weller 7135W Soldering Tip Male Insert, 0.885 in L x 0.165 in W Tip Male Insert, Copper
1 x DeWALT DW1958 Drill Bit Set, 18-Piece, Steel, Gold Ferrous Oxide
1 x Halex 26863 Reducing Washer, 3 in OD, Steel
1 x Imperial R2 Series VT0502 Exhaust/Intake Hood, Galvanized Steel Hood, White Hood
1 x HY-KO 11005FIC2 Key Blank, For: Fastec FIC2 Locks - 5 Pack
1 x DeWALT DW1163 Drill Bit Set, 13-Piece, Black Oxide
1 x Mi-T-M Choremaster CM-3000-4MHC Pressure Washer, Gasoline, 187 cc Honda GCV190 OHC Engine, 187 cc En
1 x Waddell 8201.00 DP-10 Screw Hole Plug, Birchwood - 10 Pack
1 x Camair AC100 Air Circulator, 20 in Dia Blade, 5-Blade, 3-Speed, Gray
1 x BayerAdvanced 700288S Insect Killer, Granule, Flower Bed, Ground Cover, Home, Lawn, Trees and Shrubs
1 x WinCup 240HW Beverage Cup, 16 oz Cup, Foam - 12 Pack
1 x ProSource LR358 U-Bolt, 1/4 in Thread, Stainless Steel - 10 Pack
1 x National Hardware N119-602 Cup Hook, 0.17 in Opening, 3/4 in L, Brass, Solid Brass
1 x HY-KO 11010AM3 Key Blank, Brass, Nickel, For: American Cabinet, House Locks and Padlocks - 10 Pack
1 x Forney 309 MIG Welder, 120 V Input, 30 to 140 A Input, 115 A, 1 -Phase, 20 % Duty Cycle
1 x National Hardware N159-566 Handrail Bracket with Strap, 250 lb, Die-Cast Zinc, Antique Brass
1 x JM Eagle 67462 Rigid Conduit, 1 in, 10 ft L, PVC
1 x Sevin 100530128 Lawn Insect Killer, Granular, 10 lb
1 x TIKI 1216156 Torch Fuel, Slight Petroleum, 64 oz Bottle
1 x CHEF CRAFT 20965 Cutting Board, 12 in L, 5 in W, Plastic, White
1 x HY-KO 19CHRY800S Fob Shell, 3-Button
1 x Mi-T-M Choremaster CV-3000-4MHC Pressure Washer, Gasoline, 187 cc Honda GCV190 OHC Engine, 187 cc En
1 x DeWALT DWRHS12D148 Framing Nail, 3-1/4 in L, 9 Gauge, Steel, Bright, Full Round Head, Smooth Shank
1 x Corry's 100511427 Slug and Snail Killer, Solid, 1.75 lb Box
1 x Oneida Presence Series 64190L10R Butter Dish/Cover, Glass, Clear, Rectangular, 5 in L, 3-1/4 in W - 4 Pack
1 x Tru-Flate 18-207 Blow Gun
1 x Liquid Nails FRP-310 Panel Adhesive, Off-White, 1 gal Container - 2 Pack
1 x NORTH AMERICAN PAPER T850TBK Paper Towel Dispenser, 8-1/4 in W Roll, 8-1/2 in Dia Roll, Plastic
1 x National Hardware N112-888 Handrail Bracket, 250 lb, Zinc, Brass
1 x Behrens 1212GS Pail, 12 qt Capacity, Galvanized Steel
1 x Behrens 1205 Pail, 5 qt Capacity, Steel
1 x DeWALT DWC8R99BCG Framing Nail, 2-1/2 in L, Galvanized, Full Round Head, Smooth Shank
1 x Karcher T300 Series 2.643-211.0 Deck and Driveway Cleaner
1 x DeWALT DW1177 Drill Bit Set, 20-Piece, HSS, Black Oxide
1 x GE Industrial Solutions TC150P Conduit Hub, 1-1/2 in, Aluminum
1 x IRWIN 1789226 Jobber Drill Bit, 3/8 in Dia, 3-1/8 in OAL, 3/8 in Dia Shank, Straight Shank
1 x Halex 27251 Conduit Bushing, 1/2 in Snap, 3/4 in ID x 1 in OD Dia, PVC
1 x WORX WG303.1 Electric Chainsaw, 14.5 A, 120 V, 3.5 hp, 16 in L Bar/Chain, 3/8 in Bar/Chain Pitch, Re
1 x TOPRING 88.661 Blowgun
1 x nVent ERICO EK16 Ground Clamp, Clamping Range: 1/2 to 1 in, #10 to 2 AWG Wire, Bronze
1 x Behrens 1212 Pail, 12 qt Capacity, Steel
1 x Lambro 141 Fan Eave Vent, Aluminum
1 x Behrens 1208 Pail, 8 qt Capacity, Steel
1 x Waddell 830-.3 Screw Hole Plug, Birchwood - 500 Pack
1 x Waddell 8300.25-CS Screw Hole Plug, Birchwood - 8 Pack
1 x Black+Decker 15557 Drill Bit Set, 10-Piece, Steel
1 x CCI 600006618 Lamp Cord, 2 -Conductor, Copper Conductor, PVC Insulation, 10 A, 300 V
1 x Jonathan Green 12202 Organic Insect Control, Granular, Spreader Application, 10 lb Bag
1 x DeWALT DWC8P120D Framing Nail, 2-1/2 in L, Bright, Full Round Head, Smooth Shank
1 x FLAME ENGINEERING CD-100 Propane Cylinder Dolly
1 x JM Eagle 67587 Rigid Conduit, 1-1/4 in, 10 ft L, PVC
1 x Tru-Flate 18-221 Blow Gun
1 x CROWN CTL.P.02 Citronella Torch Fuel, 64 oz - 6 Pack
1 x DeWALT DWRHS12D131 Framing Nail, 3-1/4 in L, 9 Gauge, Steel, Bright, Full Round Head, Smooth Shank
$3,789.24